Carboline Middle East. Bitumastic M Part B MSDS (POLISH), English. Download. Bitumastic M Black Part A MSDS- German, English. Download. Coal Tar, Bitumastic M, Black, 5 Gallon. Carboline. Non-stock item. Please allow for business days. Call for availability. item code: Category . Bitumastic m. Buy Bitumastic m by Carboline, SKU: ci – Carboline’s Bitumastic M is a renowned high build coal tar epoxy that.
|Published (Last):||10 November 2008|
|PDF File Size:||7.70 Mb|
|ePub File Size:||17.10 Mb|
|Price:||Free* [*Free Regsitration Required]|
Airless Spray Pump Ratio: High voltage spark testing should b e used when the dry film thickness exceeds 20 mils microns. Use 2 Thinner or Acetone.
Safety Read and follow all caution statements on this product data sheet and on the MSDS for this product. All electrical equipment and installations should be made and grounded in accordance with the National Electric Code.
Caution This product contains flammable solvents. Power mix separately, then combine and power mix for a minimum of two minutes. Reset Cancel Submit Sending Condensation due to substrate temperatures below the dew point can cause flash rusting on prepared steel and interfere with proper adhesion to the substrate.
The following spray equipment has been found suitable and is available from manufacturers such as Binks, DeVilbiss and Graco. Surfaces must be clean and dry. Do not use for potable water requirements.
Features excellent chemical, corrosion and abrasion resistance, high- build, 24 mils microns in a single coat up to 35 mils with force curingcompatible with controlled cathodic protection, and suitable for use in exposures as referenced in the following specifications: Wherever you are, Carboline products are there.
Excessive bitumastid or condensation on the surface during curing can interfere with the cure, can cause discoloration and may result in a surface haze. If the maximum recoat time is exceeded, the surface must be abraded by sweep blasting prior to the application of additional coats. Use a medium bristle brush. Typically made from coal tars and blends of resins such as epoxy, these products have been used as tank linings, to coat the interior and exterior of buried pipe, and to protect equipment subjected to water immersion.
Carboline Bitumastic 300M Coal Tar Epoxy
Bitumastic M Coal Tar Epoxy Coating Renowned high build coal tar epoxy for protection for steel and concrete in single or two- coat applications in a broad variety of aggressive industrial applications. Bitumastic is a century-old trade name that is often associated with long-term protection from water penetration. In areas where explosion hazards exist, workmen should be required to use non-ferrous tools and wear conductive and non-sparking shoes.
Voids in concrete may require surfacing. Blasted Steel 2 cts. Renowned high build coal tar epoxy for protection for steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications. This is a high solids coating and may require adjustments in spray techniques.
Northtown Company – Carboline Bitumastic® M – (Coal tar epoxy polyamide)
Employ adequate methods to remove dirt, dust, oil and all other contaminants that could interfere with adhesion of the coating. Use a 30m0 synthetic roller cover with phenolic core. This product contains flammable solvents. Solids Content By volume: Renowned high build coal tar epoxy for protection for steel and concrete in single or two- coat applications in a broad variety of aggressive industrial applications.
Farwest will be closed Decemberas well as December 31, and January 1, for the Holidays. This flexibility allows us to supply and service the most comprehensive line of coatings and fireproofing materials of any supplier in the world. Limitations Do not use for potable water requirements. Employ normal workmanlike safety precautions.
Keep away from sparks and open flames. Brush Use a medium bristle brush. S and Canada only Call our National Headquarters